+86 189 2854 5264
| Diameter | 219 / 273 / 324 mm |
|---|---|
| Rising Height | 600-1000 mm |
| Rising Time | 3-5 s |
| Material | 304 stainless steel |
| Protection Grade | IP67 |
| Drive | Hydraulic |
| Impact Rating | To be confirmed |
Overview
The KM-B01 is a hydraulic rising bollard used to control vehicle access at sensitive perimeters. It retracts flush with the road surface when lowered and rises to block unauthorised vehicles.
Application
Government compounds, embassies, data centres, banks, pedestrian zones and industrial sites requiring anti-ram protection or controlled vehicle entry.
Customisation
Bollard diameter, rising height, surface finish and control mode (remote, card, loop detector or integration with ANPR) can be configured per project.
Impact rating, certification and exact load figures must be confirmed by the factory before publishing.
Frequently Asked Questions
How many bollards are needed for one lane?
The number depends on lane width and the required level of protection. For a standard 3.5 m lane, two to three units are typical; the layout is confirmed after reviewing the site plan.
Can it work with an ANPR camera?
Yes. The control board accepts dry-contact signals from ANPR cameras, ticket machines and loop detectors.